GREATGLAS

Lindberg® Furnace Tubes, Process Tubes

| Back to Main Menu |

-----

Lindberg Furnace Tubes






Lindberg Furnace Tubes



Back to Furnace Tubes

Lindberg® Furnace Tubes, Process Tubes

Greatglas manufactures process tubes for the full lineup of popular Lindberg® furnaces.

Lindberg tube furnaces use interchangeable tube adapters and will accommodate tubes of different length.

Sizes. The most popular process tube sizes (ODs) are 1in, 2in and 3in, with some furnace models allowing tubes with up to 6" outside diameter. Please check with your particular furnace documentation regarding the recommended tubes and adapters.

Materials for the Lindberg furnace tubes may also vary, we make process tubes from Pyrex (borosilicate glass), Quartz (GE quartz), Alumina (AL 302) and hi-heat ceramics.

Our selection for Lindberg Furnace tubes expands all the time, so please contact us via the link below to see if we have your process tube at the moment.

Contact us to check the most current selection

Lindberg furnace tubes price list:

Part #
OD
ID
Overall Length
Price* ($)
Pyrex Lindberg furnace tubes
PFT-25.4 x MW x12 25.4mm
20.6mm
12"
30.00
PFT-25.4 x HW x12 25.4mm
17.4mm
12"
32.00
PFT-50.8 x MW x12 50.8mm
44.4mm
12"
47.00
PFT-50.8 x HW x12 50.8mm
41.2mm
12"
44.00
PFT-76 x MW x12 76mm
69.8mm
12"
58.00
PFT-76 x MW x12 76mm
66.4mm
12"
65.00
PFT-75 x 5mm x12 75mm
65mm
12"
70.00
PFT-75 x 7mm x12 75mm
61mm
12"
74.00
Quartz Lindberg furnace tubes
QFT-25 x MW x12 25mm
22mm
12"
35.00
QFT-25.8 x MW x12 25.8mm
21.2mm
12"
40.00
QFT-25 x HW x12 25mm
20mm
12"
48.00
QFT-50 x MW x12 50mm
47mm
12"
69.00
PFT-50 x HW x12 50mm
46mm
12"
85.00
QFT-75 x MW x12 75mm
73mm
12"
162.00
QFT-75 x HW x12 76mm
70mm
12"
170.00
Alumina Lindberg furnace tubes
AFT25.4 x12 25.4mm
19.05mm
12"
85.00
AFT50.8 x12 50.8mm
44.45mm
12"
125.00
AFT76 x12 76mm
69.85mm
12"
205.00

Order Lindberg® Furnace Tubes

Customizations for Lindberg® Furnace Tubes

We can also customize your process tubes according to your specifications, for example, you can order the tube with restrictions, with round bottom(s), and with one or both ends closed.

As for the joints we can add standard taper joints (ground glass), or ball and socket joints, and can put small flanges for sealing.

If you are in doubt what process tube size is required for your Lindberg® and Blue M® furnace you can check the latest catalog of Lindberg®/Blue M® furnaces can be found here.

Customizations for Lindberg® Furnace Tubes

Disclaimer

Lindberg® and Blue M® are registered trademarks of TPS, LLC. Greatglas is an unaffiliated and unauthorized manufacturer of process tubes for use in Lindberg and Blue M furnaces. The use of the Lindberg and Blue M names, trademarks, part numbers and furnace model numbers are for identification and compatibility purposes only.
All process tubes advertised are manufactured by Greatglas.

-----
GREATGLAS, Inc.
2040 Telegraph Road, Wilmington DE 19808

Phone: 302-998-4400
Fax: 302-994-6793
1-800-713-9886

Questions? Contact Us!